Termékek hegesztőgáz gyártó (1566)

Sealing Pliers designed for welding packaging of all sizes in the barrier material (polypropylene laminated paper and aluminum). Thanks to its small size and limited weight can be used anywhere. The pliers dual hot bar solder is available with a width mm. 300 and mm. 400 , furthermore the welds are repeatable side by side at any length. The temperature of the sealing bars is adjustable from 0 °C to 200 °C using a temperature controller positioned on the plier. Thanks to the coated bars with antiadhesive teflon, it is also possible to weld polyethylene bags of high thickness. (Min 100 my each side - my 250 max each side) Example model:ME 300 DH Seal length:mm. 300 Seal width:mm. 12 Type of bars:longitudinally ribbed Weldable materials:barrier

Con la ASO 930 | ASO 930 Plus ahora también es posible fresar el frontal y la parte inferior de una pieza de trabajo. Ya no es necesario girar la pieza. Con el fresado a bajas revoluciones se consigue aumentar la vida útil de la herramienta. Áreas de aplicación: - Idóneas para piezas pesadas, largas y de gran superficie - Fresa el frente y la parte inferior en un ángulo de 0° – 76° con anchos de fresado de 74 mm - Uso preferentemente móvil sobre el carro con ruedas, pero también con apoyo de grúa o fija Características: - Ajuste fácil de bisel y de ángulo - Regulación automática del avance, dependiendo del material, de 0 – 1,2 m/min - Estable construcción de fundición-acero - Mesa de trabajo templada con ruedas guía - Altura de trabajo 820 – 970 mm ASO 930:60269 ASO 930 Plus:67019

The automatic weld-chamfering machines from the ASO 930 series are for stationary and portable use in weld seam preparation. The attachment of large welded chamfers on the workpiece bottom edge up to a chamfer length of 74mm can be performed by the machine effortlessly without any thermal change to the material. V, X, K or Y seams can be prepared thanks to the gradual angle adjustment from 0° - 75°. The machines are very durable and show their strength in every material through their sturdy construction. Extremely high tool service life can be achieved with the low-speed chamfering. Sheet thickness started at 8mm can be processed. Smaller workpieces can be processed manually. Advantages: Easy to adjust to material thickness, chamfer angle and working height No thermal change to the material V-, X-, K-, I- or Y- seams possible Very long operating life and cutting performance Gradual feed adjustment depending on material from 0 - 1. ASO 930:60269 ASO 930 Plus:67019

Queste fresatrici automatiche per bordi sono ideali per creare grandi smussi di saldatura con angoli da 15° a 80°. Queste macchine utensili sono molto resistenti e dimostrano la loro forza su qualsiasi materiale. Grazie alla fresatura a basso regime si raggiungono durate utili estremamente elevate. ASO 900:42699 ASO 900 Plus:63133 ASO 900 Plus-Bigger:64909

The automatic weld-chamfering machines from the ASO 900 series are for stationary and portable use in weld seam preparation. The attachment of large welded chamfers on the workpiece upper edge up to a chamfer length of 53mm can be performed by the machine effortlessly without any thermal change to the material, because the heat dissipation occurs through the chip. V, X, K or Y seams can be prepared thanks to the gradual angle adjustment from 15° - 80°. The machines are very durable and show their strength in every material through their sturdy construction. Extremely high tool service life can be achieved with the low-speed chamfering. Sheet thickness started at 8mm can be processed. Smaller workpieces can be processed manually. Advantages: Easy to adjust to material thickness, chamfer angle and working height No change to material properties, through heat dissipation via chip V-, X-, K- or Y- seams possible ASO 900:42699 ASO 900 Plus:63133 ASO 900 Plus-Bigger:64909

The automatic recess chamfering machine ASO 910 is for welded seam treatment of, for example, duplex steel. The recess chamfering or resetting of cladding is mastered excellently by the edge chamfering machine. The attachment of chamfers on the top edge of the workpiece is possible up to 65mm. Thanks to the gradual angle adjustment from 90° - 75°, clean transitions are created between two workpieces with different thicknesses. The machine is very durable and shows its’ strength in every material through their sturdy construction. Extremely high tool service life can be achieved with the low-speed chamfering. Sheet thickness started at 8mm can be processed. The front, top and/or bottom side can be processed in one step through a special shape chamfer. Cavities in the front can be chamfered using the disc groove cutter. Advantages: Easy to adjust to material thickness, chamfer angle and working height Cutter head can be set in Z and X-axis No thermal change to the material Motor:5.5 kW | 0 – 900 rpm Energy:400 V, 50/60 Hz Maximum feed traverse in X- / Z-axes:65 mm / 15 mm Angular adjustment:90° - 75° Workpiece thickness:8 - 100 mm Weight:390 kg Item no.:64247